Accessory Kit Spare Parts Treadmill Belt Lubricant Silicone Oil Cleaner Allen Wrench Cleaning Towel For Maintenance

$28.00

Product Content : Treadmill belt lubricant , treadmill belt cleaner, allen wrench, safely key, cleaning towel, manual instruction(all optional) 

Functions: Protect the wear-resistant coating on surface of the running board, prolong the service life of running belt and board.

Application: All kinds of treadmill with different brands

Description

The 3 Most Important Treadmill Maintenance Tasks

Maintaining your treadmill falls into three steps:

  • Lubricating
  • Cleaning
  • Adjusting the belt

Simple routine cleaning and a preventive maintenance program will extend the life of your treadmill.

If you follow our guide and concentrate on all three steps, then you’re going to keep your treadmill working correctly. Each of the points above needs to be completed but some more regularly than others.

  1. Treadmill Lubrication

There is a motor inside of your treadmill, and that means a lot of moving parts. When those parts move, they rub together, and that can cause wear and tear. The motor turns the belt and, if it is not working correctly, the belt is not going to move, and you are going to be unable to run. Keeping the belt running is essential to keeping your treadmill working smoothly.

  1. How To Clean Your Treadmill?

It is good practice to wipe your machine down after every use. Take the time to wipe down any part of the machine which you have touched, and any parts which sweat may have dripped on. Sweat and body oils can break down tough materials over time.

Wiping your treadmill after every use also helps to keep the dust off of your machine. Spray our belt cleaner to handrails, display, and any other parts which may need to be cleaned, then use the soft cloth with water dampened to wipe it off.

If you’re sharing the machine with multiple family members, then make sure that they wipe down the machine too. Also keep the area near the treadmill clean. While in use, the treadmill gathers dust that may cause problems in the operation of the equipment.

Important: do not clean or wipe under the running belt.

  1. How To Adjust (Center & Align) The Treadmill Belt?

Ensure the running belt is centered on your treadmill at all times. Running style and a non-level surface are two instances that may cause the belt to drift off center. Minor adjustments to the two bolts at the rear of the treadmill are necessary when the belt has drifted off center.

This is a common issue with treadmills and one which you can fix all by yourself.

  • Press STARTto begin running belt, then increase the treadmill speed to 1/2mph.
  • Stand at the rear of the treadmill to determine which direction the belt is drifting.
  • If the belt drifts to the left, turn the left adjustment bolt clockwise 1/4 TURN at a time (using the supplied Allen wrench).
  • If the belt drifts to the right, turn the right adjustment bolt clockwise 1/4 TURN at a time (using the supplied Allen wrench).
  • Observe the tracking of the belt for about 30 seconds. Repeat previous steps if needs.
  • Important: do not run belt faster than 1/2 mph while centering. Keep fingers, hair and clothing away from belt at all times

Title

Go to Top